Before installing the software, ensure the printer is plugged in, loaded with thermal paper, and connected to your computer via USB, Serial, or Ethernet. Turn the power switch . Step 2: Run the Driver Installer
If you are using the printer with label software, it is recommended to use the Native Printer Drivers included in the software or available via the Driver Service Pack (DSP) rather than standard Windows drivers.
: Navigate to File > Select Printer > Add within the CODESOFT application to search for and install the native driver.
Follow these instructions to install the downloaded driver on a Windows system: Codesoft Tp-3160s Driver Download
Click . Once the progress bar fills, turn your printer ON and connect the USB cable to your computer. Windows will recognize the new hardware and map it to the newly installed driver. 5. Configuring the TP-3160s for Daily POS Use
Windows XP, 7, 8, 10, and Windows 11 (32-bit and 64-bit). Linux: Various distributions supporting CUPS.
If the executable setup fails to recognize the printer, use the native Windows utility: Before installing the software, ensure the printer is
When installing the driver manually (e.g., as a Generic/Text Only or using the TP-31xx package), use these parameters: Line Thermal Printing. Command Set: Supports Epson ESC/POS and STAR commands. Interfaces: Typically Serial, USB, and 100M Ethernet. Paper Width: 80mm. Quick Troubleshooting
Since the TP-3160S is a discontinued model, official drivers are often found on regional distributor sites or archived manual pages:
Drivers can be sourced through the following primary channels: : Navigate to File > Select Printer >
Defective USB cable, unstable port, or failure to register the driver interface.
If you recently purchased the printer, a driver disk is usually included in the box.