Disco 240 Dmx Controller Manual !new! -

For users just wanting to run pre-programmed "Auto" or "Sound Active" modes, the manual does an adequate job.

: Set your fixtures to their DMX addresses. On a 240 controller, fixtures are typically spaced 16 or 20 channels apart (e.g., Fixture 1 = Address 1, Fixture 2 = Address 17, etc.). 3. Programming Scenes To save a static look:

: Tap the SCANNERS button(s) for the lights you want to adjust. disco 240 dmx controller manual

A scene is a static look (e.g., all lights red, moving head pointing center). Follow the manual’s programming sequence:

Understanding the physical interface is essential before powering on your console. Front Panel Overview For users just wanting to run pre-programmed "Auto"

The manual details a few pro tips to get more out of your console:

The joystick won't work until you assign the Pan and Tilt DMX channels to it. all lights red

Press and hold the button until the indicator flashes.

Ensure the Blackout button LED is not flashing or turned on. When active, Blackout cuts all DMX output.

: Controls how fast a chase transitions from one step to the next.