: While it guides the setup, some Reviews.io users noted that post-install issues like slow drips can be difficult to diagnose without further professional help. Community Insights
Connect the (hard water in) and Outlet (soft water out) using flexible hoses, following the directional arrows on the unit. Connect Drain and Overflow :
Position the valves so that the softener inlet and outlet are closed, and the bypass valve is open. This allows the main water to resume flowing into the house while you work. 3. Route Hard Water Taps (Optional) harvey hv3 water softener installation manual
Minimum 1.0 bar (14.5 psi) to maximum 6.0 bar (87 psi). A pressure-limiting valve is mandatory if your pressure exceeds 6 bar. Required Tools and Materials Pipe cutter or hacksaw
Inspect all hose connections, drain fittings, and the base of the machine for any signs of weeping or dripping water. 🧂 Step 6: Adding Salt : While it guides the setup, some Reviews
Note: Keep the bypass valve open and the inlet/outlet valves closed during the initial pipe modification. Step 3: Connect the Inlet and Outlet Hoses
: It provides crucial operating parameters, such as the required pressure range of 1.5–6 bar (20–90 psi) and the need for WRAS-approved flexible hoses. This allows the main water to resume flowing
If the unit has been stored below freezing, let it warm to room temperature for 24 hours before installation. Frozen internals can crack.
The manual warns: That causes salt bridging.