Knox Keysecure 3b Installation Manual Hot __hot__ Instant

Never mount the unit directly on top of the dashboard or against windows where greenhouse heat amplification occurs.

with a polyester powder coat finish, making it highly resistant to environmental factors and physical attacks. Pros and Cons Rugged Build : Heavy-duty 1/4" steel construction. Technical Setup

A strobe can be added to signal when a key is unsecured. Connect the strobe's positive wire to Terminal 1 and the ground to Terminal 4. 3. Specifications & Features Material 1/4" plate structural steel with polyester powder coat Capacity Secures 1 mechanical master key User Memory Stores up to 5,000 unique PIN codes (3–6 digits) Audit Trail 2 MB memory logs up to 16,000 events with date/time stamps Operating Temp -40°F to 185°F (-40°C to +85°C) 4. Programming and Operation knox keysecure 3b installation manual hot

Reattach the faceplate module to the housing, ensuring the connector pins align properly.

Verify PIN authorization. Inspect the internal chamber for dirt, debris, or a bent key shank. Red wire wired to switched power. Never mount the unit directly on top of

Mounting screws and terminal blocks for wiring. 2. Knox KeySecure 3B Installation Steps

The unit may be in power-save mode. Press and hold any key for two seconds to wake it up. Technical Setup A strobe can be added to

[Vehicle Battery positive (+)] ---- [3A Inline Fuse] ---- (Red Wire) ---- [KeySecure 3B] [Vehicle Chassis Ground (-)] ----------------------------- (Black Wire) -- [KeySecure 3B] [Optional: Ignition Sense] ----------------------------- (Blue Wire) --- [KeySecure 3B]