Live View Axis Fix Verified Free -

Tested on build #2.1.4. The axis logic has been corrected. I tested pitch, yaw, and roll in the Live View environment. Visuals now align 1:1 with sensor data.

A camera might have enough power to "boot," but not enough to power the image sensor or IR cutters. Ensure your PoE switch has enough wattage for the camera's peak draw. live view axis fix verified

Crucial for transmitting the actual video data. Tested on build #2

New smart sensors (like the Bosch BHI360) run on-chip axis monitoring at 1kHz. If the live view drifts by even 0.1 degrees, the system auto-corrects before the user notices. Visuals now align 1:1 with sensor data

To verify if the issue is strictly isolated to the browser interface or if the camera's internal encoding engine is failing, test the stream using an external media player like VLC: Open VLC Media Player. Select > Open Network Stream ( Ctrl + N ).

Verify that your network bandwidth can support the stream. If the bitrate is too high, decrease it in the video settings. 4. Firmware and Factory Reset

When this box was checked, TBC would force a fixed, non-native rendering resolution. This could cause several problems, including clipping the bottom of the 3D view, hiding UI overlays like the axis indicator, and breaking background rendering.