Nokia 7250 Ixr X1 Installation Guide Direct

The rear panel contains the field-replaceable units (FRUs) responsible for power and cooling. Two slots supporting 1+1 redundancy.

Nokia 7250 IXR-X1 Installation Guide: A Comprehensive Deployment Manual

Align the mounting brackets with the rack holes and secure the chassis using cage nuts and screws. Check Alignment: Ensure the unit is level and stable. 3.3 Grounding the Chassis nokia 7250 ixr x1 installation guide

Typical: 35°C – 45°C at idle.

Keep the protective optical dust plugs inserted until you are ready to connect fiber cables. The rear panel contains the field-replaceable units (FRUs)

Crimp an 8 AWG (or larger) grounding wire to the provided two-hole lug.

The 7250 IXR-X1 typically occupies 1 Rack Unit (1RU) of space. Check Alignment: Ensure the unit is level and stable

1.0 Last Updated: 2025-2026 cycle Target OS: SR Linux 24.10.2+ or SR OS 22.10.R2+

Once SR Linux is installed, you need to perform the basic network setup to make the router operational.

Route fiber optic cables and Ethernet cables through the cable management system. Ensure cables are not strained or kinked. 5.2 Connecting Power Verify again that the chassis is grounded. Connect Power Cables: Connect the cables to the PSUs.