This error appears in the flashing log when the tool detects that the phone’s memory is not in a suitable state for writing. The solution is to perform a of the flash memory before attempting the flash again. In Miracle Box or SP Flash Tool, look for an option to format the NOR flash. Some technicians report that this error occurs when the firmware and the phone’s flash chip are not fully compatible, and a full wipe is the only way to proceed.
): Open the dedicated module software (MTK or SPD). Select your target processor version from the dropdown settings menu. nokia ta1174 flash file mtk top
For beginners: Use the PAC file method with "Format all + download". For professionals: The MTK tab with scatter allows advanced partition manipulation. This error appears in the flashing log when
After flashing has finished:
But why is the "MTK Top" specification so important? Because MTK Top Tool handles the low-level BootROM protocols required for these feature phones better than generic tools. Some technicians report that this error occurs when
For variants: Use tools like Avenger Box , Infinity BEST , or SPD Upgrade Tool .
| Error | Cause | Fix | |-------|-------|-----| | S_BROM_CMD_STARTCMD_FAIL | Preloader handshake issue | Reinstall VCOM drivers; try a different USB port (USB 2.0). | | S_FT_DOWNLOAD_FAIL (4008) | Wrong scatter file | Verify you are using TA1174-specific files, not TA1143 or TA1194. | | BROM ERROR: S_SECURITY_AC_SEC | Authentication required | Use MTK Top’s “Bypass” feature under Tools > MTK Auth Bypass. | | DA_HASH_MISMATCH | Corrupted Download Agent | Extract the DA file from the firmware folder instead of default. | | Phone stays dead after flash | Battery disconnected internally | Open the phone, disconnect battery flex for 30 seconds, reconnect. |
