V3700e Patched — Phison Mpall

Click the button on the right side of the interface. The tool will scan your USB ports and display your drive in one of the numbered grid boxes.

If the Controller Vendor is , and your controller model matches the range supported by the v3.70 generation (mostly PS2251 series), you can proceed. Step 2: Preparing the Environment phison mpall v3700e patched

Match this to your controller type (usually left at default or FC1=0xff). Click the button on the right side of the interface

Disconnect the drive, wait 5 seconds, and plug it back in. Windows will now detect it as a brand-new, healthy storage device. Troubleshooting Common MPALL Errors Step 2: Preparing the Environment Match this to

Select your NAND type if known, or leave it to auto-detect. Navigate to the Firmware section within the editor: Check the box for Do ISP .

The drive may need to be put into test mode (shorting pins) to be detected by the controller.

: Use a tool like ChipGenius or Flash Drive Information Extractor to confirm you have a Phison controller and to note the "ISP Version."